Owner`s manual
105
WARNING
It is possible that a station may misuse the External Forward
facility. The Default setting is that no station is allowed to set the
facility.
Note
Broken tone will be heard at your station until all call forwarding is
cancelled.
You cannot Forward to a station that has the ‘Do Not Disturb’
feature set.
Do Not Disturb
If your station is set to ‘Do Not Disturb’, anyone trying to call you
will receive a busy (engaged) tone. If the person trying to
contact you has a keystation, ‘Do Not Disturb Enabled’ will
appear on its 'display'. ‘Call Back’ and ‘Alarm call’ are the only
incoming ringing that will be accepted when this feature is set.
Stations may be set not to ring.
This option cannot be set for station 20.
Lock Code
You use a Lock Password to lock, unlock, or to make calls from
a locked station. The default Lock Password for all stations is
123, but each station may change its password. Station Lock
Passwords can be examined from the Programming Station.
The allowable range is a three-digit code in the range 000 to
999.
Lock
This feature allows you to lock your station to prevent
unauthorized users from making external calls. Turn station
lock ON or OFF.
Sys Sped Dial override
When this option is On stations can dial all the numbers in the
system speed dial list even if they are normally restricted from
dialing that number.
Voicemail Password
This is the password used to access individual station voicemail
boxes. By default, each station is allocated the same Voicemail
Password, (1111). You can enter your own password, which
can be up to eight digits long, as follows:
The password can be up to 8 digits in length.
Tone Protection
When on a call, the call waiting tone of conference tone is
audible to the user. Where these tones are not required, the
feature should be disabled.
Call Recording
This option allows the station to record calls. When set the
option to record the call appears on the keystation display when
they are on a call. The station must be allocated a voice mailbox
for the feature to operate.