System information

Getting Started
Welcome to n-Command MSP.
The n-Command MSP server comes preloaded with the n-Command
MSP software. The default IP address is 10.10.10.1. The default login
user name is admin and the password is adtran. There are a few tasks to
perform before you can begin using the system to manage devices on
your network. For maximum network security, refer to the
recommendations in Network Security Considerations.
Log into the n-Command MSP system and complete the following steps to
get started:
Step 1. Configure the network settings for your specific network. All the
necessary network settings can be configured by accessing Network
Settings from the Settings menu in the upper right corner of the
Administration Dashboard. Refer to Changing Network Settings for
specific instructions.
Step 2. Generate a new license, if you have not already done so. The
system will prompt you to generate a license upon logging into the server
for the first time. The license can also be generated by selecting License
Information from the Settings menu in the upper right corner of the GUI.
Refer to License Information for detailed instructions for generating the
license. You will need to register a user name and password at
http://www.adtran.com to access the ADTRAN support website for this
step.
Step 3. Change the default admin password. It is strongly recommended
that you change the password for the admin account. To change the
password, log into n-Command MSP as the admin user and select Edit
Account from the menu bar at the top of the main dashboard. Follow the
steps described in Changing a User's Password.
Step 4. Change the Administration Dashboard password. It is strongly
recommended that you change the password for the Administration
Dashboard. Follow the steps described in Changing the Administration
Dashboard Password. Refer to Administration Dashboard to gain access
before attempting to change the password.
Step 5. Edit the default device access credentials. One feature of the n-
Command MSP software is its ability to automatically discover devices on
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A