System information

SIP Files Menu
The SIP Files section of the Device Details tab provides a list of
packet capture (PCAP) files received for the device. This
information is available only if SIP is enabled on the device.
The PCASH settings must also be configured before SIP traffic PCAP files
will be received. Refer to PCASH Settings for more information.
To sort the list by a specific column, click on the column heading.
The order changes from ascending to descending with each
additional click. The PCAP list has many of the same tools
available on the other menus in n-Command MSP, such as CSV,
Refresh, Filter, and Columns. The number of PCAP files
displayed can be limited to 20, 30, 50, 100, 500, or 1000 devices
per page using the Page Size menu at the bottom of the page.
The display settings can also be set to automatically choose the
number of files that will fit on the page (select Auto) or display all
files (select All). If there are a large number of PCAP files to
display, choosing All files could cause a delay in the amount of
time it takes to refresh the screen. Use the navigation tools at the
bottom of the page to view additional pages. By default, the files
displayed will automatically fit the page and are sorted by the
Begin time column.
To view a ladder diagram displaying the SIP call sequence for a
specific file, select a PCAP entry from the list and double click on
the entry. A new tab opens with the name of the file as the header.
From this tab, each transaction is displayed and the exact time it
occurred. You can also download the file locally by selecting the
Download pcap file button in the upper right corner and
specifying a location in which to save it.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A