System information

Firmware
Firmware Tab
The n-Command MSP Firmware tab provides an interface for firmware
management. To open the Firmware tab, select the Open Tab menu
from the upper left-hand corner of any screen in n-Command MSP. Select
Firmware from the drop-down menu.
Firmware is used for distribution to network devices being managed by n-
Command MSP. Each device has specific firmware that can be acquired
from ADTRAN. For assistance, contact your reseller or ADTRAN technical
support at http://www.adtran.com
.
Once the firmware is available locally, move it to the n-Command MSP
server. The firmware can be held until a later time to transfer to the units
through a job. Select the New Firmware Job button to navigate to the
Jobs menu.
Select any of the following tasks for more information:
• Uploading Firmware to the n-Command MSP Server
• Deleting Firmware from the Server
• Updating Firmware on a Device from the Firmware Menu
A comma separated value (CSV) file can be exported from the Firmware tab
listing the File Name, Version, Size, and Creation Date by selecting the
Export CSV button from the bottom of the Firmware menu.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A