System information

Pushing a Configuration to a Device
Navigate to the New Job window by selecting Add Job from the Jobs
tab. Select the Tasks tab from the New Job window. Refer to Creating a
New Job for more information on accessing the New Job window and
configuring notifications, schedules, and devices that accompany this job.
Once you are in the Tasks menu, select Push Config to push a
configuration to a unit, or units, managed by n-Command MSP. To
configure this job, follow these steps:
1. Enter the configuration into the Push Configuration dialog box.
This information can be entered manually, or copied and pasted
from a text
file.
2. Select whether you want to save the unit's configuration before
pushing the new configuration, or after pushing the new
configuration by checking the appropriate check box.
3. The Push Configuration task is now complete.
4. You can now return to configuring additional parameters for this job
or other tasks to accompany
this job as described in Creating a
New Job.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A