System information

Pushing Firmware to a Device
Navigate to the New Job window by selecting Add Job from the Jobs
tab. Select the Tasks tab from the New Job window. Refer to Creating a
New Job for more information on accessing the New Job window and
configuring notifications, schedules, and devices that accompany this job.
Once you are in the Tasks menu, select Push Firmware to configure the
firmware push. To configure this job, follow these steps:
1. Specify the Device Group whose firmware you want to upgrade.
You can choose the device group from a drop-down menu of all
your currently configured groups.
2.
Specify the Ne
w Firmware to which you are upgrading. You can
choose the firmware from a drop-down menu of all your currently
loaded firmware.
3. Specify whether the unit's configuration will be saved to the unit's
nonvolatile random access memory (NVRAM) by checking the
check box next to Write Config.
4. Specify the Firmware Destination from the drop-down menu. You
can select Automatic (default), CFLASH, or NONVOL.
5. The Push Firmware task configuration is now complete.
6. You can now return to configuring additional parameters for this job
or other tasks to accompany this job as described in Creating a
New Job.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A