System information

Saving Filters
Filters are used to limit the devices displayed in a list based on a specified
criteria. To create a filter in the Devices tab, refer to Adding a Filter to a
List. To save the filter once it is applied, use the following steps:
1. Select the Add button under the Saved Filters heading.
2. Enter a descriptive title for the filter in the blank field provided.
3. Select Add to save it.
The filter will apply automatically to new devices as they are discovered.
The filter title can be changed using the Edit feature from this same
menu. Select the filter from the drop-down menu and select Edit. Make
the necessary changes and save it again.
Delete a filter by selecting it from the drop-down menu and select Delete.
The filter is removed from the list.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A