System information

Processor Utilization
The Processor Utilization module on the Dashboard tab displays the
percent of processor being used on each device. This module can be
filtered to show only those devices with an minimum usage by changing
the options settings. The number of devices can be limited by setting the
Max Devices number. The Refresh rate can also be changed from 30
seconds to 1 or 5 minutes. The options settings are available by selecting
the wrench in the lower right corner of the module. After making changes
to the options, select the wrench again to return to the status view.
For more detailed information about a particular device, double click the
device listed in the grid. This opens the Device Details menu.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A