System information

Heap Usage
The Heap Usage module on the Dashboard tab displays the percent of
heap used on each device. This module can be filtered to show only those
devices with a minimum change or minimum usage by specifying a value
in the options settings. The number of devices can be limited by setting
the Max Devices number, up to 100 devices. The Refresh rate can also
be changed from 30 seconds to 1 or 5 minutes. The options settings are
available by selecting the wrench in the lower right corner of the module.
After making changes to the options, select the wrench again to return to
the status view.
For more detailed information about a particular device, double click the
device in the grid. This opens the Device Details menu.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A