System information

Average Uptime
The Average Uptime module on the Dashboard tab displays the average
number of days the devices have been operational. This module can be filtered
to show only those devices with a maximum or minimum uptime specified in the
options settings. The Refresh rate can also be changed from 30 seconds to 1 or
5 minutes. The options settings are available by selecting the wrench in the lower
right corner of the module. After making changes to the options, select the
wrench again to return to the status view.
The devices are grouped together by platform type. For instance, all the
NetVanta 7100s are grouped together and all the Total Access 916 Gen 2 are
grouped together. For more detailed information about a device type, click on the
column. This breaks the data down further by the firmware revision. For an even
more detailed view, double click the firmware column. This opens the Devices
menu with a filter for the specific firmware applied.
ADTRAN n-Command MSP v6.1 Help
61700841G1-1A