Specifications

ManualsBrandsCommander Connect ManualsBusiness equipmentConnect V6

➢ IF Date/Time is X

• Everyday

• Day-of-Week

• Specific Date Range

➢ IF Startup

➢ IF GSM Signal Strength

• Above X

• Below X

➢ IF Statement X Triggers

6.2.2. Supported THEN Actions

➢ THEN Change Output

• Activate for a time

• Activate for a time – Pause – Activate for a time

• Activate (Leave Activated)

• De-Activate (Leave De-Activated)

• Change State

➢ THEN Send Message

• Plain Message

• Input/Output Status

• Temperature (Probe A)

• Temperature (Probe B)

• Temperature (Probe A and B)

• Temperature (Avg of Probe A and B)

• General Status

• Power Status

• Airtime Status

• Analog Input Status (Able to define own scale and unit)

• Global Input Status

• Please Call Me

• Variable Value Message*

➢ THEN Place Voice Call

• Specify time to ring

• Specify number of calls to make

• Specify time between calls in minutes

➢ Enable/Disable Statements

➢ Enable/Disable ALL SMS sending

➢ Set Multiple Outputs to Pattern

➢ Change Variable*

• Increment

• Decrement

• Clear

• Set to Value

➢ Then Change Active SIM card**

• Change to SIM 1

• Change to SIM 2

• Toggle active SIM

Please note: * Only available on the 641 and 1281 models

** Only available on the 1281 model

For an in-depth discussion on all the trigger conditions, See the “Advanced Technical Manual” for

detail. (Available on the CD supplied with the product, or on the Internet at:

http://www.gsmcommander.com)