Specifications

6. CONFIGURATION

6.1. Configuration via PC

The following is required to configure the GSM Commander:

➢ A PC running Windows XP / Vista / Windows 7

➢ Setup utility installed on the PC (Available on the CD supplied with the product)

➢ USB cable (Provided)

➢ Power supply (See 5.1)

➢ Antenna (See 5.4)

➢ SIM card(s) (See 5.3)

Please note: The GSM Commander will startup immediately if no SIM card is inserted, but

there would be no GSM functionality, which means none of the GSM features will work.

Follow these steps:

Step 1:

Insert SIM card(s) into unit

Step 2:

Connect GSM Commander to PC via the supplied USB cable

Step 3:

Connect power to the GSM Commander

Step 4:

Run the Utility (Start > All Programs>GSM Commander V6 > Configure GSM Commander)

The software will show this screen

when started. Here you can select

whether you would like to start a new

setup (via the Wizard), or whether you

would prefer opening an existing setup

from a file on your PC, or retrieve the

setup currently on the GSM

Commander

During the setup process, the user will specify a cellphone number for the administrator. (The

first number in the list of cellphone numbers) This number will be used for administrative

purposes as explained in section 6.2