Installation guide
Starting Configuration
SolarWinds Failover Engine is running on the secondary active server. Using
the System Tray icon, verify that the server status displays S/A. SolarWinds
Failover Engine is not running on the primary server which is set to passive.
Using the System Tray icon, verify that the server status displays -/- to indicate
that SolarWinds Failover Engine is not running.
Steps to Perform
Table 6: Perform the following steps to verify that data is synchronized
following Auto-switchover in a Pair configuration.
ResultsActivityMachine
ID
SolarWinds Failover Engine successfully
starts.
Right-click the taskbar icon and select
Start SolarWinds Failover Engine .
primary
Login to SolarWinds Failover Manager.
The System Overview screen is displayed.In the Servers pane of the SolarWinds
Failover Manager, select the server pair.
The Server: Summary page shows a
connection from the secondary server to the
primary server.
Navigate to the Server: Summary tab to
show the connection from the secondary
(active) to primary (passive).
Data replication resumes from the secondary
server back to the primary server. Both the
Select the Data: Replication tab and wait
for both the File System and the Registry
File System & Registry status become
Synchronized.
status to display as Synchronized.
Access the SolarWinds Failover Engine
logs and confirm that no exception errors
occurred during the synchronization
process.
Successful completion of this procedure leaves the SolarWinds Failover Engine
Pair in the state necessary to perform the final part of the Installation Verification
process, detailed in Exercise 3 - Switchover.
Exercise 3 - Switchover
The Switchover exercise demonstrates the ability to switch the functionality
and operations of the active server on command to the other server in the pair
using the SolarWinds Failover Engine. Perform this exercise only after
successfully completing the Auto-switchover and Data Verification Exercises.
44 - Installation Verification Testing
Installation Guide - SolarWinds Failover Engine