User's Manual

7) Go to the appropriate app store and download the app.
Download the app on all of the devices you plan to use with the LevelMatePRO+.
Note: When searching for the app for an iPad, be certain to select “iPhone Only”
from the “iPad Only” pull down at the upper left corner of the search results as
the LevelMatePRO+ app is an iPhone app that runs full screen on the iPad.
The LevelMatePRO+ has a security feature that records the unique serial
number of the device to your smartphone or tablet so that when you are in close
proximity to other vehicles with LevelMatePRO+ installed, your smartphone or
tablet will only recognize your LevelMatePRO+. So during this step you need to
start the app on each smartphone or tablet so the serial number for your
LevelMatePRO+ will be recorded on your devices.
NOTE: You will have 10 minutes from the time you switched the
LevelMatePRO+ on to allow new smartphones or tablets to “learn” your
LevelMatePRO+. If this time expires, you can restart the 10 minute “learning”
window by sliding the LevelMatePRO+ on/off switch to the OFF and then to the
ON position. If you want to add another smartphone or tablet at a later time,
simply turn the on/off switch to the OFF and then to the ON position to start a
new 10 minute “learning” window.
Start the app on each smartphone or tablet and once the app connects to the
LevelMatePRO+, minimize the app and start the app on the next smartphone or
tablet. Continue this process until each smartphone or tablet has connected to
the LevelMatePRO+. Once a smartphone or tablet has connected to the
LevelMatePRO+ it will always remember and only connect to that
LevelMatePRO+.
8) Install the LevelMatePRO+.
The LevelMatePRO+ must be installed on a wall or other vertical surface on the
interior of your vehicle. The top cover of the product must face the side, front or
rear of the vehicle when installed. The arrows on the product label should point
upward toward the ceiling of the vehicle. Attempt to install the product as straight
as possible both horizontally and vertically. There is no need to install the
product perfectly level or perpendicular as the product is designed to
compensate for imperfect installation orientation. Using the 2 provided mounting
screws, mount the product on a wall or any vertical surface. Again, insure that