User's Manual
1) Remove the 4 screws on the top cover.
2) Remove the top cover and set aside.
3) Remove the bags containing the battery and mounting screws from
inside and set aside.
4) Remove the battery from the packaging and install it with the plus
(+) sign up as in figure 1.
Figure 1
5) Reinstall the top cover with the 4 screws you removed in step 1.
Be sure to install the arrows on the top cover in the same direction as the arrow
printed on the circuit board.
6) Slide the on/off switch to the ON position
You will hear 2 beeps confirming that the unit is on. If you don’t hear 2 beeps
then slide the on/off switch in the opposite direction. If you still don’t hear 2
beeps after trying the on/off switch in both directions then either the battery is
installed upside down, the battery has a sticker on the bottom that needs to be
removed, or the battery is dead and needs to be replaced with a new one.
7) Go to the appropriate app store and download the app.
Download the app on all of the devices you plan to use with the LevelMatePRO.
Setup and Install the LevelMatePRO