User's Manual
Thank you for purchasing a LevelMatePRO wireless vehicle leveling
system. This product was designed for ease of use and utilizes the best
possible components and engineering to achieve accuracy you can
count on. I believe you will find it to be an extremely useful and time
saving tool. LevelMatePRO is proudly Made in the USA.
Important Information about your LevelMatePRO
The LevelMatePRO has an on/off switch which controls power from the
battery to the system. When the switch is in the off position the battery
is completely disconnected from the system and no power will be drawn
from the battery. Turning the unit completely off using the switch is
recommended when driving for long distances or when the vehicle is in
storage. When the switch is in the on position the LevelMatePRO will
operate in an automatic power management mode. When you first
switch the unit on it will be connectable from the smartphone or tablet
app and will remain that way for a configurable number of hours while
the unit is not detecting motion (see Step 16 in the Setup and
Installation section). After the configured number of hours with no
motion detected the LevelMatePRO will enter a sleep mode to conserve
the battery. Once motion is detected, the unit will wake and will be
connectable again. So, when you move the vehicle and arrive at a new
location you will be able to start the app and use the product to level
the vehicle. If you ever try to connect to the LevelMatePRO and are
unable to do so, the unit is likely in the sleep mode. You can wake the
unit without motion by cycling the on/off switch to the off and then to
the on position. When you move the switch to the on position you will
hear 2 beeps. This will indicate that the unit is powered on and that the
battery is in good condition. If you ever move the switch from the off
position to the on position and don’t hear 2 beeps this will indicate that
the battery needs to be replaced.