User's Manual

17) Select the display resolution
Using the Advertising and Display Settings screen (figure 8) select the display
resolution you would like to use. The default display resolution is .25” but you
can select one of the other resolutions if desired. The higher the resolution you
select, the more stable the distance measurements will be but accuracy will be
sacrificed. In general, if you use blocks or boards under your tires to level your
vehicle you would set the display resolution to match the thinnest block or board
you carry with you for leveling. In other words, if the thinnest block or board you
have is .50” then select .50” for the display resolution.
NOTE: For towable vehicles, the display resolution for front-to-back
leveling and the Recall Hitch Position function will remain at .25” no matter
which display resolution you select. The reason for this is that the jack
that controls front-to-back leveling adjustment is infinitely adjustable and
changing from .25” would be an unnecessary sacrifice of accuracy.
18) Select the operating side of the road
Select the side of the road that you drive on so LevelMatePRO can establish a
baseline for which side is the driver and passenger on your vehicle. Once you
have set the advertising time, selected the display resolution and selected the
operating side of the road, tap Save to save your selections.