System information

G2T Programmers Guide Rev-A 17-Nov-2014
76
8.5.1.2. General Properties
Go to the Tree tab. Using the Remote SNMP Agent drop down
menu, select localhost then select the icon for properties.
In the General Properties dialog box, enter the IP address of the
Universal Switching Corporation switching system and leave the
other options set to default settings:
Expand the localhost menu and select Snmpv1/v2c. Set both
Read community and Write community to public (factory default)
or to your custom setting as defined in the web GUI (See Section
9.2). Click OK when done.
Now you should be back on the Tree tab. Select the bubble
option for SNMPv2c: