System information

G2T Programmers Guide Rev-A 17-Nov-2014
74
8.5. SNMP v1, v2
The C3-001 currently supports Simple Network Management
Protocol (SNMP) v1 and v2. It is ideal for network environments that
monitor network-attached devices for conditions that warrant
administrative attention.
Universal Switching equipment that includes a C3-001 CPU will also
include a set of Management Information Bases (MIB’s) that
describe the structure of the management data and includes all
relevant object identifiers (OID). The MIB’s are included on the
System Resource Disc that ships with the equipment. All SNMP
supported equipment use the same sysSettings.MIB and
sysTrap.MIB. A system specific MIB is also included. Contact
[e-mail]
for the latest copies of MIB’s for your
equipment.
8.5.1. SnmpB Browser
The examples and screenshots used for Section 8.5 were taken
from an SNMP MIB browser titled SnmpB. It is an open source
platform and is available at the link below:
http://sourceforge.net/projects/snmpb/
The below sections walk the user through preliminary
configurations in SnmpB in order to communicate with the
Universal Switching Corporation device.
8.5.1.1. Load Modules
Copy the three MIB files to the SnmpB programs mibs folder
located in the Program root directory, C:\Program Files
(x86)\SnmpB\mibs