System information

17-Nov-2014 G2T Programmers Guide Rev-A
69
8. C3-001 Remote Control Assembly
The latest generation CPU, the C3-001 provides the brain and the
remote control capacity of the switching system. The CPU offers a
host of new features and is compatible with all Universal Switching
Corporation switching systems. Below is a list of key features:
• SNMP v1, v2 Supported
• 10/100BaseT Ethernet
• Multi-Serial Control (RS-232C, 422, 485)
• USB 2.0 (Type-A) for serial control
• Non-Volatile Flash Memory
• Firmware updates over Ethernet
• Field Upgradable Flash
8.1. Remote Control Interfaces
This section describes the various remote control interfaces, their
pin-out and required settings.
 NOTE: In the G2T400CE series mainframe, the remote
interfaces are fed to the rear panel of the switch and are not
active on the front panel of the CPU. See Section 3, STO 231
for more details.
8.1.1. 10/100 Ethernet
The Ethernet port is designed per standard 10/100-Base-T
specifications, and has standard pin assignments. For reference,
the table below describes the pin assignments
Pin
Signal Assignment
1
Tx +
2
Tx -
3
Rx +
4
No Connect
5
No Connect
6
Rx -
7
No Connect
8
No Connect