System information

17-Nov-2014 G2T Programmers Guide Rev-A

5.2.2.24. *OPC command

This command sets the OPC bit in the ESR.

*OPC

Sets the OPC bit in the ESR. This causes the SBR to be updated. The

bit can only be cleared by *CLS or ESR?.

5.2.2.25. *OPC? command

*OPC?

Immediately returns 1.

5.2.2.26. *WAI command

This command is only included for compatibility to the 488.2

standard.

*WAI

Since the device does not support “over-lapped” commands, this

command does nothing. It is included for compatibility with the

standard.