System information

G2T Programmers Guide Rev-A 17-Nov-2014

5.2.2.19. *ESE? command

This command reads the Event Status Enable Register (ESER).

*ESE?

Returns the current value of the ESER.

5.2.2.20. *SRE command

This command sets the value of the Service Request Enable

*SRE n

Sets the value n (n can be from 0 to 255) in the Service Request

Enable Register (SRER).

5.2.2.21. *SRE? command

This command reads the value of the Service Request Enable

*SRE?

Returns the current value of the SRER.

5.2.2.22. *PSC command

This command sets the value of the PSC Register to n.

*PSC n

Set the value n (n can be 0 or non-zero) in the PSC register.

5.2.2.23. *PSC? command

Sending this command reads the value of the PSC register.

*PSC?

Returns the current value of the PSC register as value of zero or 1.