System information

17-Nov-2014 G2T Programmers Guide Rev-A
29
4. Communicating with the System
This system offers flexibility for remote control by offering a variety
of interfaces. Remote control over may be established over any or
all of the interfaces simultaneously. These interfaces include:
•
TCP/IP (Ethernet).
The embedded CPU supports 10/100 Base-T Ethernet
networks, is LXI and SNMP compliant. See Section 8.1.1 for
more details
•
RS-232C/422A/485.
Also known as serial interface were originally developed for
modems and data terminals. These types of interfaces are
now commonly used for controlling a wide range of
hardware configurations. See Section 8.1.2 for more details.
•
USB
USB 2.0 (Type-A) for serial control. See Section 8.1.2.2. for
more details.
All interfaces comply with a derivative of the IEEE 488.2 protocol.
These interfaces allow computers to access the system’s operating
features providing remote access to configure, control and
receive operating status of the switching system.