System information

G2T Programmers Guide Rev-A 17-Nov-2014
24
User Description: User defined description of the system that
can be changed from the web GUI. By
default, it is the same as the System
Description.
2.12.4. Lock Screen
The front panel controls may be locked by the user to avoid
unintentional configuration changes. To lock the front panel,
punch in a lock code then press Enter. Valid lock cades are
anywhere from 1 to 9999.
Once the front panel is locked, it must be unlocked before
regaining access. Note that remote control access is always
available regardless of the status of the lock screen.
 NOTE: If the security code is unknown, press LCL, enter 7145,
and press ENT on the keypad to unlock it.