System information

17-Nov-2014 G2T Programmers Guide Rev-A
23
2.12.2.5.2. Voltage
When selected, the voltage menu will appear. This screen shows
the status of the power supply voltages in the system. It is divided
into three columns including the Main, PSU1 and PSU2.
Main: This is the voltage level as seen from the CPU
processor (after the diode). It is a combination of
voltages in redundant systems.
PSU1: This is the voltage being read by the power supply
monitoring board in Power Supply 1. (before the
diode)
PSU2: This is the voltage being read by the power supply
monitoring board in Power Supply 2. (before the
diode). Note that in single supply systems, these
values will be zero.
2.12.3. About Unit
The About Unit screen includes information about the firmware,
system MAC address and custom user description which may be
changed from the web GUI.
System F/W: System firmware model number
Display F/W: Display firmware model number
MAC Address: MAC address of the CPU
Revision Code: System firmware revision code