System information

G2T Programmers Guide Rev-A 17-Nov-2014
22
2.12.2.5. Diagnostic
The default view of the Diagnostic screen shows the current
module population. Empty, non-operational, or non-recognized
modules are shown with a dash ( - ). Modules that the CPU
expects to be installed but are not detected are designated with
an “X”. Expected and installed modules are shown in order from
top to bottom with their accompanying slot number.
2.12.2.5.1. Self Test
If selected, a self test will be executed. The display will flash
“Updating List….” while the self test is being processed. The results
of the self test are then displayed.