System information

17-Nov-2014 G2T Programmers Guide Rev-A
17
2.12.2. Configure Unit
This Configure Unit sub-menu contains the following configuration
options.
2.12.2.1. CPU-1 / CPU-2
This is where the Ethernet and Serial communication ports are
configured.
2.12.2.1.1. Network
IP Address: If a static IP address is to be used, enter it here.
Otherwise a DHCP address will be used.
Subnet Mask: Enter the subnet mask of your LAN
Default Gateway: Enter the default gateway of your LAN.
Network ID: Default number is “0” and is used to distinguish two
systems that have the same product code. This
number is also the alpha code for the Serial RS-485
address where Network ID “1” makes RS-485
address “A”.
DHCP: This button will toggle the DHCP function to ON or
OFF depending on your network configuration.
Contact your network administrator for details.
Apply: Press the Apply button to lock in the Ethernet
settings. This will take you back to the Home screen.
The message Force Close…Please Wait will be
displayed in the Last Action Window while the
system is updating.