User manual

[255.255.255.000]
[255.255.254.000]
[255.255.252.000]
[255.255.248.000]
[255.255.240.000]
[255.255.224.000]
[255.255.192.000]
[255.255.128.000]
[255.255.000.000]
[255.254.000.000]
[255.252.000.000]
[255.248.000.000]
[255.240.000.000]
[255.224.000.000]
[255.192.000.000]
[255.128.000.000]
[255.000.000.000]
Gateway [130.000.000.014] Gateway address [Up]/[DWN] Select
number. [Enter]/[Exit]
Position within address.
[000.000.000.000] =
Disable
DNSServer [192.168.001.001] DNS-Server address [Up]/[DWN] Ziffer
auswählen.
[Enter]/[Exit] Position in
der Adresse.
[000.000.000.000] =
Disable
PortNo [10001] Used Port 10001 = Default
Save and
reboote
[OK] Button [Enter] All settings are being
saved.
Default and
reboot
[OK] Button [Enter] Sets all settings to
„Default“ and saves
them
Reboot [OK] Button [Enter] Rejects all settings.
7. Firmware Update
As soon as a updated firmware is available, it will be published on www.comm-tec.de, from which it can
be downloaded.
Please note that the ProTUNE HD requires two different firmwares (front panel and mainboard).
To execute a firmware update, proceed as follows:
7.1 Front Panel
To update the firmware of the front panel, use the program „FWLoaderProTUNE“, which can be found on
both our homepage as well as the product CD in scope of delivery. You’ll also need a crossed, serial
cable (RS-232).