User manual

3.3.4 OSD Settings
If you select “OSD Settings”, the following window will be displayed:
1. OSD Timeout: If you switch channels in full screen, information about the current channel will be
indicated on the bottom of the screen. Press [VOL34] to set the duration of how long the
information will be displayed on the screen. The range of the duration is “1 second ~ 10 seconds”.
2. OSD Transparency: You can press [VOL34] to select the values. There are 5 levels of
transparency, 10%, 20%, 30%, and 40% and “NO” (means no transparency function).
3. OSD Screen Saver: With this parameter you can set the start time for the launching of the screen
saver.
3.3.5 Timer
When you select “Timer Settings” you will see the following screen: