User manual

3.1.4 Channel Search
If you select „Channel Search“ from the menu, the following dialog will be indicated:
1. In „Satellite” select with [VOL34] the required satellite
2. In “Only FTA”, press [VOL34] to select if to scan only free to air or
encrypted channels as well. When you choose "Yes", only free to air channels will be
searched.
3. In“Channel Search”, press [VOL34] to search “TV + radio channels", "TV channels" or
"radio channels".
4. In the "Search Mode" you can select between "Automatic Search" for a general search or
"Default Search" for all default transponders.
5. Select "Default Search" to enable a network scan.
6. Choose whether you want to delete the previous search or not.
7. Switch to “Search” by [VOL4] to start the scan. The progress bar on the channel search is
displayed and lists the channels found.