ProTUNE HD / S Digital HD / SD Satellite TV Tuner User Manual Version 1.
Disposal The packaging of your device is composed exclusively of recyclable materials. Please run this again sorted according to the "dual system". This product may not be disposed with the normal household waste, but should be brought to a collection point for recycling electrical and electronic equipment. The - Symbol on the Product, user’s manual or packing refers to disposal. The materials are as marked recyclable.
Content 1. SCOPE OF DELIVERY .................................................................................................................. 3 2. INSTRUCTION ............................................................................................................................... 3 DESCRIPTION FRONT PANEL / REMOTE CONTROL ...................................................................................... 3 2.1.1 FRONT PANEL .........................................................................
1. Scope of Delivery • • • 2. IR Remote Control Power Cord Product-/Software-CD Instruction The ProTUNE HD / is a HDTV-Tuner, to receive digital TV (DVB-S2) and digital radio over satellite. The bi-directional RS-232 and Ethernet port allows you to control the ProTUNE HD by external control systems such as AVIT®, RTI®, AMX®, Crestron® or others. Setup can be done by the included IR Remote Control or by the easy to use front panel.
2.1.2 Back Panel 1. IF OUT: Satellite output for daisy-chaining with other devices. 2. IF IN: Satellite Input 3. AUDIO SYM.: Balanced audio output 4. USB: Interface for firmware updates, for the connection to a external data carrier, to be used for recording or time shift functions. 5. HDMI: Digital output for the transmision of audio and video data. 6. OPTICAL S/PDIF: Optical, digital audio output for the connection to an external AVReceiver. 7.
2.1.
2.2 Basic Functions • Turning on the ProTUNE HD Turn on the [Device mainstream] switch. If you turn on the ProTUNE HD for the first time, the first channel from the default channel list is displayed. With further commissioning shows the ProTUNE HD to the channel that was displayed before the last turn. • Power 1. Press [Power] Key to enter the Standby state. 2. In Standby state, press [Power] Key again to call back the unit and play the previous channel.. 3.
2. Select “Audio Track” with [CH56], to change the “Audio Modes” press [VOL34] for Stereo, Mono, Right/Left. INFO In TV mode, press [INFO] to open the information screen, where the parameters of the current channel are being displayed. The availability of so-called Service Information (SI-Data) depends on the respective program/service provider.
EPG (ELECTRONIC PROGRAM GUIDE) The ProTUNE HD includes a electronic program guide (EPG). The EPG provides program information in table format (if provided by the broadcast station). The EPG includes information about the broadcast times and program contents. Press [EPG] to open the EPG window. 1. Press the “Time” function key [RED], to obtain information about the program for the upcoming days: Navigation icons for EPG 2. Use [VOL34] to navigate, by pressing [OK] the desired time will be displayed.
3. By pressing the“Timer” function key [GREEN], you can add the selected show directly to the Timer. To navigate, press [CH56VOL34] and set the desired date, on and off time using the number keys. To confirm, select “Save”. TV/RADIO The [TV/R] button allows you to toggle between television and radio services. When transmitting a radio station, the receiver displays a background picture. To switch from radio back to television, press the TV/Radio button [TV/R] on the remote control..
MULTI In TV mode, press the [MULTI] button to enter the multi picture mode. 1. In Multi Picture Mode, nine channel preview windows are being displayed (static display), starting with the current channel. Only the marked preview channel is played continuously. 2. Press [CH56VOL34] to move the selected channel between the preview programs. 3. Use the number buttons [1] ~ [9] to move the marker directly on the corresponding channel. With [OK] you can get the selected channel in full screen mode.
GOTO (SEARCH FUNCTION) Press [Goto] or the yellow butten when in channel list, to enable the search function. You can navigate with the [CH56VOL34] buttons, confirm with the blue button, and delete with the red button. ZOOM 1. Press [ZOOM] to activate the image enlargement function. 3. Press [ZOOM] again, and the video image will be enlarged x1, x2, x4, x6, x8, x12, x16, depending on number of strokes. 4. Press [EXIT] to leave the ZOOM function. TV/STB Press [TV/STB], to toggle between TV and STB mode.
FORMAT Press [Format] in the full-screen mode, to select between the different resolutions: 576i -> 480i -> 576P -> 480P -> 720P_50 -> 720P_60 -> 1080i_25 -> 1080i_30. EXIT Press [EXIT] to exit menus and applications..
3. Menu 3.1 Installation When entering the menu, the first item is "Installation". The window is indicated as follows: 1. 2. Press [CH56VOL34] to select between LNB Settings, Satellite List, TP List, and Channel Search. Press [OK] to get to the respective setting/function. 3.1.1 LNB Settings Press [VOL34] to get to “LNB Settings”. A window will be displayed as indicated below: 1. LNB Frequency: Press [VOL34] to select between “Universal“, „Twin“, „User“ and C-Band.
22K: Use [VOL34] to select “ON” or “OFF”. The 22kHz signal is used at KU Universal LNB to switch between low and high frequency band. ! NOTE: If you set the LNB type to Universal, you cannot change 22K. DiSEqC1.0: Press [VOL34] to switch DiSEqC switch options: disable / LNB1 / LNB2 / LNB3 / LNB4 2. Polarization: Press [VOL34] to select between: Auto / H / V / OFF. 3. Transponder: Press [VOL34] to select the desired transponder.
2. Press the [GREEN] button to open “Add Satellite”.
3. If you press [Yellow], you will be asked „Delete it?“. Select „Yes“ to delete the marked satellite, or „No“ to cancel the process. 3.1.3 TP List If you select “TP List”, the following dialog will be indicated: 1. Press [VOL34] to change the marked satellite. 2. Press the [Red] key to open “Edit TP“, where the data of the transponder can be edited.
3. Press [Green] to open“Add TP”, where you can add a new TP and adjust its parameters.
4. Press [Yellow] to delete the transponder. Select “Yes” for confirmation or “No” to exit.. 5. Press [Blue] to open a dialog box with the option to do a transponder scan. Select "Yes" to confirm, "No" exit the process.
3.1.4 Channel Search If you select „Channel Search“ from the menu, the following dialog will be indicated: 1. In „Satellite” select with [VOL34] the required satellite 2. In “Only FTA”, press [VOL34] to select if to scan only free to air or encrypted channels as well. When you choose "Yes", only free to air channels will be searched. 3. In“Channel Search”, press [VOL34] to search “TV + radio channels", "TV channels" or "radio channels". 4.
8. You can stop the search with [Exit] and save the channels found until then. 3.2 Channels 3.2.1 TV Channel List The TV Channel List allows editing your services.
FAVORITES If you want to add services to your favorite list, press [FAV] and confirm with [OK]. A small Icon will be visible behind the selected service 1. In TV mode, press [FAV] to display the favorites group window on the screen. 2. You can your favorite channels in the favorites group window by [CH56] and confirm with [OK] in order to go to this channel. 3. In larger groups, you can navigate with [PGUP/PGDN]. 4. You can also select the different favorite groups in the channel list by [VOL34]. 5.
SKIP Press [GREEN] key to enter into skip mode. Press [CH56] key to move the highlighted service and press [OK] to add a “skip mark”. MOVE Press [YELLOW], then press [CH56] to move the highlighted service and press [OK] to mark. A small Icon will be visible behind the selected service.
EDIT Press [BLUE] to “Edit”. You can select between “Sort”, “Edit” and “Delete”: SORT Press [RED] to “Sort”. There are four types to sort. Press [CH56] to move the highlighted service and press [OK] to confirm. The following options can be selected: - Name (A-Z): Sorting in Alphabetical order. Name (Z-A): Sorting in Alphabetical order. FTA: Sort channel through free and scramble sequence.
2. - Edit In “Edit Channel” menu, press [GREEN], then press [CH56] to move the highlighted service and press [OK] key to open the “Rename” window as follows. Press [RED] key to select “CAPS”. Press [GREEN] key to delete the char on the cursor. Press [YELLOW] key to save the modification Press [BLUE] key to cancel the operation 3. Cancel Press [BLUE], then press [CH56] to move the highlighted service and press [OK] to mark as deleted. Exit the menu to delete the services. 3.2.
3.2.3 Rename Favorites In this dialog you can specify the title of your favorite list. Select the following using the [VOL]: Delete with [Red] "DEL" step by step, use [yellow] "CAPS" to choose between upper-and lowercase letters, confirm with [Blue] "OK". Note: Please make sure that the name change of a favorite is confirmed by [OK] and that it’s also activated in the dialog, before leaving the menu: OK to accept the changes Otherwise, the changes will not be accepted.
3.2.4 Delete All If you press [OK] you can delete all services: To activate this function, press [VOL4]. Confirm with „Yes“, or „No“ to abort.
3.3 System Setup 3.3.1 Language Please select the language menu as follows:: 1. Language: press [VOL34] to select from the following languages: English, French, German, Russian, Arabic, Portuguese, Turkish, Spanish, Polish and Italian. 2. First Audio: Some channels have more than one audio language available; with this function, you can set the first audio for this channel. If the playing channel has the same audio as the “First Audio” you set, the system will play this audio language as default.
3.3.2 Local Time Setting 1. GMT-Usage: Refers to the time provided by the satellite stream. Press [VOL34] to change the settings. 2. GMT-Offset: This option is available if you set GMT-Offset to „ON“. Press [VOL34], to set “GMT Offset”. Every selection increase/decrease the GMT Offset for 30 minutes. 3. Summertime: You can set the summertime. 4. Date and Time: These options are only available if you set GMT-Offset to “OFF”.
3.3.3 TV System In the Sub menu „TV Format“, the following screen is indicated: 1. You have the option between various modes dependent on your TV Set: Auto -> PAL -> PALN -> PAL-M ->PAL-BG -> NTSC -> 576i -> 480i -> 576P -> 480P -> 720P_50 -> 720P_60 -> 1080i_25 -> 1080i_30. Press [VOL34], to select the required TV Mode. 2. Format function is used to switch between screen formats. You have the choice between: 4:3 PS / 4:3 LB / 16:9. Press [VOL34], to select the required TV Mode. 3.
3.3.4 OSD Settings If you select “OSD Settings”, the following window will be displayed: 1. OSD Timeout: If you switch channels in full screen, information about the current channel will be indicated on the bottom of the screen. Press [VOL34] to set the duration of how long the information will be displayed on the screen. The range of the duration is “1 second ~ 10 seconds”. 2. OSD Transparency: You can press [VOL34] to select the values.
1. Timer Settings: Select „Timer“ and choose up to 8 Timer. Press [VOL4] to enter into the following menu. 2. Select the required Timer mode with [VOL34]. Select between “OFF”, “once” or “daily”. 3. Wakeup Channel: press [OK] key to enter channel list and select the related channel you want to set. 4. Wakeup Date: use the number keys to input your wakeup date 5. On Time: use number keys to set the wakeup time 6.
3.3.6 Firmware Informationen If you select “Firmware Information” you will see the following screen: This is for service purposes only. 3.3.7 Parental Lock Parental Lock” allows protecting the main menu and the channels (which are previously marked as “lock” in the Edit menu) with a PIN code. The default password is “0000”: 1. Parental Lock: Press [VOL4] to set “ON” to force a password entry for every menu you like to enter. If you set “OFF” no password is required.
Sobald Sie das richtige Paßwort eingegeben haben, sieht der Bildschirm wie folgt aus: 2. Menu Lock: If the menu lock is set to "Yes", then you have every time you want to open the menu, enter the password. When set to "No" to open the menu without previous password entry. 3. Program Lock: When set to "Yes" you must enter a password to view the channels you have not selected in the "channel" as blocked channels. When set to “No”, these channels can be selected without first entering the password. 4.
3.3.8 Factory Setting If you enter Factory Settings you will see the following screen: 1. If you select „YES“ the Receiver will be set to standard value as originally delivered. Please make sure that you really want to do this! 2. Press [EXIT] to leave the menu or select „NO“.
3.3.9 Common Interface Receiving encrypted programs Your unit is equipped with a "Common Interface" for the inclusion of a CI module. To receive encrypted channels you must first insert a CI module with a valid smart card into slot provided. Important: Since the Common Interface has been placed inside the unit in order to prevent thievery, and therefore is not accessible in closed condition from the outside, the installation should only be done by trained service staff.
Please use [VOL4] to select the following menu: Here you will get information about the Common Interface module and the Smart Card.
3.4 DVR Option If you select “DVR Option” you will see following screen: DISK MODE Your ProTUNE HD is a PVR Ready Receiver (PVR = Personal Video Recorder), and therefore is equipped with USB 2.0 for an external hard drive. The recording capacity is dependent on the size of the connected hard disk or the USB drive and the data volume of the broadcast material.
3.4.1 DVR Manager If you select “Record Manager” you will see following screen: Here are the recordings made so far. These can be locked with [Green] and by entering the four-digit PIN number, deleted using the [Blue] button, or renamed by the [Red] button. To play the recording, press the [OK]. The reproduction is successful, following display appears. .
3.4.2 Storage Format Select "Storage Format" and the following screen appears: By formatting the hard drive, the file system is renewed. This might be required if an error on the hard disk was detected. Warning! Formatting will cause complete erasure of the hard drive, which means that all recordings and mulitmedia files (e.g. MP3‘s) will be lost. 3.4.3 DVR Settings If you select "DVR Settings", the following screen appears: With the time shift recording, time-shifted television is possible.
1. Set „time shift“ to „On“ by pressing [VOL4], which means that the possibility of time shift functin is generally given. 2. In addition, if you set the the option „Time Shift Recording“ to „On“ using [VOL4], it will enable a permanent recording of the current channel. 3. Toggle between the different host types by pressing [VOL4]. 3.4.4 Diashow Settings When you select “Diashow Settings” you will see the following screen: You have the ability to reproduce images in a slideshow.
3.4.5 Storage If you select “Storage” you will see the following screen: You will receive a so-called root contained for the media stored on your external USB media. To get that folder, press [OK]. • Images You can display images in JPG and BMP format on the ProTUNE HD. To view the files in the Media Player, you can connect a USB device on which the JPGs and BMPs are stored, to the USB socket on the receiver. The button [JPEG] will access the media player directly.
Select the desired image using the button [CH56], and then the image will be displayed in the preview window. By pressing [OK], the JPG or BMP file will be displayed either in full screen or in the original size, depending on the setting. 1. List View To select the list type within a folder. Select between music and pictures. 2. Repeat To select the repeat mode. 3. Settings Select default with the button [3], the following dialog appears: 4.
5. All MP3 Use to create a list of all mp3 files in the current directory. 6. All Images Use to create a list of all jpg/bmp files in the current directory. 7. All Files Use to create a list of all files in the current directory. • Music You can use the ProTUNE HD to play music tracks in MP3 format. To play the files with Media Player, you can connect a USB device with MP3 content to the USB socket of the ProTUNE HD. You can use the button [MP3] to access the media player directly.
Title File Size Duration Repeat with button [2] Trick Mode
3.4.6 Remove Storage Safely When you select “Remove Storage Media Safely” you will see following screen: This way you avoid a possible data loss during improper removal of the USB medium.
4. ASCII Remote Protocol RS232 Protocol 19200 Baud 8 DataBit No Parity 1 Stopbit IP Protocol: IPV4 TCP/IP xxx.xxx.xxx.xxx Every CMD start with ASCII-Escape then the Tuner-ID Is ASCI 0 Defaultport 10001 ESC = 0x1b =27 0 = 0x30 = 48 the CMD .... and stop with ASCII – Carriage Return CR = 0xd = 13 For Example Get Version: ‚ESC‘0FV? ‚CR‘ ‚ESC‘0FV01.00‘CR‘ No.
No. Command To ProTUNE HD From ProTUNE HD 19 ESC,0,F,A,?,CR ESC,0,F,A,H0 ..
No.
No.
No. Command To ProTUNE HD 58 ESC,0,R,T,No,Mo de,Art,CT,CH,CZ, CE,YZ,YE,MZ,ME ,DZ,DE,HZ,HE,mZ ,mE,DHZ,DHE,D mZ,DmE,CR SetRecTimer From ProTUNE HD ESC,0,R,T,CR No = TimerNo (0 - 7) Modus = 0 off, 1 once, 2 daily, 3 weekly Art = 0 Channel, 1 Record CT..
5.
IR-Table IR_KEY_WWW IR_KEY_AB IR_KEY_PUP IR_KEY_PDN IR_KEY_FAV_PLUS IR_KEY_FAV_MINUS IR_KEY_HOME IR_KEY_SUBT IR_KEY_APP1 IR_KEY_APP2 IR_KEY_APP3 IR_KEY_REC IR_KEY_POWER IR_KEY_TVR IR_KEY_EXIT IR_KEY_EPG IR_KEY_FAV IR_KEY_AUDIO IR_KEY_OK IR_KEY_ZOOM IR_KEY_PAUSE IR_KEY_PVRLIST IR_KEY_OPT IR_KEY_PREV IR_KEY_NEXT IR_KEY_GOTO IR_KEY_TS IR_KEY_STEP ASCII 0 - t V W X Y Z [ \ ] ^ ' a b c d e f g h i j k l m n o p q Remote Model 1 Remote Model 2 Remote Model 2 Remote Model 2 Remote Model 2 Remote Model 2 Remote M
6. Network Settings 6.1 Setting the IP-Address In order to get to the Setup Menu, please proceed as follows: - Press the OK / SETUP button, and keep pressed. - Switch on the unit using the mains switch on the rear. The MAC-Address will now be indicated on the display. You can toggle through the menu using the < / > + buttons. Displayed menu entries can be changed using the up / down + The position of the cursor is changed using the OK and MENU + buttons. buttons.
Gateway [130.000.000.014] Gateway address DNSServer [192.168.001.001] DNS-Server address PortNo Save and reboote Default and reboot [10001] [OK] Used Port Button [Enter] [OK] Button [Enter] Reboot [OK] Button [Enter] 7. [255.255.255.000] [255.255.254.000] [255.255.252.000] [255.255.248.000] [255.255.240.000] [255.255.224.000] [255.255.192.000] [255.255.128.000] [255.255.000.000] [255.254.000.000] [255.252.000.000] [255.248.000.000] [255.240.000.000] [255.224.000.000] [255.192.000.000] [255.
7.2 Mainboard The firmware of the mainboard must be updated via USB (e.g. USB-Stick) The category “Upgrade per USB” can be found in „User Settings“. If you have a USB 2.0 compatible Stick, or your USB hard drive is equipped with the lates software, it can be selected with [VOL4], then select the upgrade file and confirm under „Start“ with [VOL4]. Note: Please follow the warning. Otherwise, date could be lost, and the ProTUNE HD might lose its functionality.
8. Technical Data Type Description Cat.No. ProTUNE HD / S Professional, digital DVB HD Tuner 715011 Tuner module Single DVB-S2 Tuner incl. Loop Through F-Type, 75Ohm 950MHz~2150MHz DVB-S and DVB-S2 Demodulation MPEG Transport Stream A/V Decoding Transportstream MPEG-2 ISO/IEC 13818 Profile Level MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.
A ASCII Remote Protocol 46 Aspect Ratio 56 Audio 6 Audio Output analog 4, 56 balanced 4 digital 4, 29, 56 electrical 4 AV-Receiver 4 Information 32 Update 54 Firmware Update Front Panel 54 Mainboard 55 H HDMI 4, 29 I B Basic Functions 6 C Images 41 Installation 13 IP Address 53 IP Protocol 46 IR Remote Control 3 IR Table 51 L Channel Number 6 Channel Search 19 Channels 20 delete all 26 edit 23 favorites 21 list 20 lock 21 move 22 rename favorites 25 skip 22 sort 23 Common Interface 35, 56 Control 56
RS232 4 Protocol 46 S Safety 2 Satellite 9 add 15 delete 16 edit 14 Input 4 Satellite List 14 Screen Format 12 Search 11 Setup Diashow 40 DVR (Recording) 39 language 27 LNB 13 Network 53 OSD 30 Parental Lock 32 time 28 Timer 30 TV System 29 Storage 41, 45 Subtitle 10 System Setup 27 Timer 30 TP List 16 add transponder 17 change satellite 16 delete transponder 18 edit 16 transponder scan 18 Transponder 14 list 16 Transportstream 56 TV Format 29 TXT 10 U USB 4 V Video Output analog 4, 56 digital 4, 29, 56
