User manual

6. Network Settings
6.1 Setting the IP-Address
To get to the setup menu, please proceed as follows:
- Press the OK / SETUP button and keep it pressed.
- Turn on the unit by the power switch on the back.
- The MAC-Address will now appear on the display.
Use the < / > + buttons to scroll through the menu.
Use the Up/ DWN + buttons to change the current menu entry.
Use the OK und MENU + buttons to change the position of the cursor.
 the OK button
IMPORTANT: When entering the IP-Address of the ProTUNE HD into the web browser, you will
get to the website of the disposed X-Port module. Please don’t change anything
here!! Please only make settings over the front panel.
If you want to control over TCP/IP, the RS-232 connector must be disconnected. It’s
not possible to use both networks at the same time (parallely).