User manual

16 of 17
4.) Mark the position of the motor carriage (e.g. using a pencil) and then loosen the 4 socket head screws:
5.) The mirror plate can then be fully tilted down manually.
6.) In order to remove the projector tray, the corresponding mounting screws must be loosened first (see 1.)
and the brackets must be tilted open (see 2.). Then move the tray towards the small mirror and remove it
(see 3.).
7.) You then have access to the engine, control box incl. power supply, and your projector incl. wiring.
8.) After troubleshooting has been completed, assemble the unit by following the above points in reverse
order.