Instruction manual

72
Using the PC/Mac Client Software
3 Select the Enable checkbox.
4 Beside the Buz
zer drop-down menu, select the "beep" duration or select OFF to disable the
"beep."
5 In the video window, select the area you wish to monitor for motion.
6 Click Sav
e to apply your settings.
Result: The system
beeps when it detects motion, and a green "M" icon appears. The green
"M" icon indicates that the system is only detecting motion, but not recording. To have the
system record motion events, enable motion recording in the recording calendar (Remote
Setting tab>Record>Schedule).
Configuring Alarm Notifications
Configure the settings for alarm devices (not included).
To configure alarm noti
fications:
1 Click the Remote Setting t
ab, and click Alarm>Alarm.
2 Configure the following:
• Alarm In: Select
the channel that you wish to configure.
Alarm Type: S
elect the alarm type N/O (normally open), N/C (normally closed), or select OFF.
Buzzer: Sel
ect the "beep" duration when an event occurs.
Latch Time: Select the desir
ed latch time when an alarm triggers.
Show Message: Sel
ect the checkbox so that the system displays a warning message during
an alarm recording.
Send email: Select the checkbo
x for the system to send out email alerts during alarm
recording.
Full Screen:
Select the checkbox to enable the system to go into Full-screen View when an
alarm triggers.
Alarm out: Sele
ct the checkbox to enable alarm out devices to activate.
Enable Record: Sel
ect the checkbox to enable system recording when an alarm triggers.
Post Recording:
Select the desired post recording time after an alarm triggers.