Instruction manual

Using the PC/Mac Client Software

2 Configure the Substream settings:

• Channel: Sele

ct the channel you wish to apply the settings to.

• FPS (Framerate): Sel

ect the desired recording frame rate. Note that higher frame rates

require greater bandwidth consumption during remote viewing.

• Bitrate: Sel

ect the desired video bitrate.

• Audio: Sele

ct Enable or Disable to enable or disable the system from streaming audio when

viewing the system remotely.

3 Cl

ick Sav

e to apply your settings.

Configuring Email Notification Settings

To configure email notification settings:

Click the Remote Setting tab, and click Network> Email.

2 In the Email drop-down menu, select Def

ault to use the default Lorex email server

(recommended) or select Custom to use your own custom SMTP email server.

If you want to use Lorex’s e

ail server (recommended):

1 In the Sende

r Email field, enter the email address of the sender. This can be any email

address of your choice.

2 In the Rece

iver Email field, enter the email address you want the DVR to send alarm

notifications to.

3 In the Interval dr

op-down menu, enter the duration the DVR must wait before sending out a

new notification. 



For example, if you select a 3 minute interval, the DV

R will send out email notifications every

3 minutes until the DVR stops detecting motion / alarm. The DVR will only send out

notifications when it detects motion/alarm triggers.

4 Click Sav

e to save your settings.

If you select "Enable", and want to use y

our own email server:

1 Configure the following:

• SSL: Sel

ect Enable or Disable to enable/disable Secure Socket Layer protocol.