Instruction manual

66
Using the PC/Mac Client Software
Configuring Recording Parameters
To configure system recording parameters:
1 Click the Remote Setting t
ab, and then click Record>Rec Parameters.
2 Configure the following:
• Channel: Select the channel y
ou wish to configure.
• Record: Sel
ect Enable or Disable to start or stop system recording.
• Pre-record:
Select whether to enable or disable pre-recording.
3 Click Sav
e to apply your settings.
Configuring the Recording Schedule
To configure the recording schedule:
1 Click the Remote Setting t
ab, and then click Record>Schedule.
2 Configure the following:
• Channel: Sel
ect the channel you wish to configure.
• Week: Sel
ect the day of the week you would like to apply the settings to.
The recording schedule is
arranged as a grid. Each row
represents a recording type
(Continuous, Motion, and
Alarm), and each box
represents an hour.
3 Click the recording grid, and select the type and duration of recording.