Instruction manual
58
Using the PC/Mac Client Software
• : Click to close all connected channels. Note that the system continues to record when
you close channels remotely.
•
: Previous page.
•
: Next page.
•
: Click to open the selected channel in full screen view.
•
: Click to select the desired split-screen viewing options.
5 Split screen v
iewing: Click the desired viewing mode.
6 Mute: Click
to mute audio.
7 PTZ Controls: PTZ (Pan, Ti
lt, Zoom) control for connected PTZ cameras (not included).
8 Connection Status: Show
s the type of connection used.
• P2P (peer-to-peer) indicates that the video is streaming directly from the DVR to the computer
running the
Client Software.
• RELAY
indicates that the video is streaming through a Lorex video server. While relay mode
is activated, the system will disconnect after 10 minutes of inactivity. Relay mode is only used
when a direct connection cannot be made between the DVR and computer.
Changing Viewing Modes
You can change the number of channels that the system displays simultaneously (i.e.
Split-screen Mode, Single-channel Mode, etc.).
To change the DVR’s viewing mode:
• Click one of the following:
.
• If the controls are not shown, click
.