Instruction manual

55
Connecting to Your DVR Over the Internet on PC or Mac
Step 3 of 3: Connect to the DVR Over the Internet
Follow the steps below to connect to the DVR over the Internet using a PC or Mac.
NOTE: Make sure to upgrade your DVR to the latest firmware version. Yo
u must have the latest
DVR firmware and client software to connect to the DVR over the Internet.
PC
1 Insert the software CD that comes included with the system. Open the CD and click DVR
Software>Lorex Client Software - PC. Follow the on-screen instructions to install.
• OR, download the Cl
ient Software for PC from www.lorextechnology.com.
2 Once installation is finished, double-click the Lo
rex Stratus Client 1 icon ( ) from the
desktop. The DVR login screen appears.
Select Device ID
Enter Device ID
Enter User Name (default: admin)
Enter Password (default: 000000)
Enter Client Port (default: 9000)
Click Login
3 Under Login Type, select Device ID.
4 Under Devic
e ID, enter the DVR’s Device ID. Press PTZ/ on the front panel to find the
Device ID.
5 Under User
Name, enter the DVR’s user name (default: admin).
6 Under Pas
sword, enter the DVR’s password (default: 000000).
7 Under Client
Port, enter the DVR’s Client Port (default: 9000).
8 Click Login.
•
If t his is the fi rst time con necti ng to yo ur syst em , you wi ll be p ro mpted to c hange the pa ssw ord.
Enter t
he new password and click OK.
Enter the new password
and click OK
• Enter the new password in the login screen and click Login to connect to the DVR.
The Client Software connects to your DVR and streams live video
from your cameras.