Instruction manual

114
Appendix E: DDNS Setup (Advanced)
4 Open the Lorex Stratus Client ( ) from the Applications list.
Select IP Login
Enter IP address
Enter User Name (default: admin)
Enter Password (default: 000000)
Enter Client Port (default: 9000)
Click Login
5 Under Login Type, select IP Login.
6 Under IP Addr
ess, enter the DVR’s IP Address (e.g. 192.168.0.100 ).
7 Under User
Name, enter the DVR’s user name (default: admin).
8 Under Pas
sword, enter the DVR’s password (default: 000000).
9 Under Client
Port, enter the DVR’s Client Port (default: 9000).
10 Click Login.
•
If t his is the fi rst time con necti ng to yo ur syst em , you wi ll be p ro mpted to c hange the pa ssw ord.
Enter t
he new password and click OK.
Enter the new password
and click OK
• Enter the new password in the login screen and click Login to connect to the DVR.
DDNS Setup—Access your DVR Remotely over the Internet
Setting up DDNS connectivity allows you to view your DVR from any computer or
compatible mobile device with Internet access.
NOTE: Except where noted, the instructions below are the same for PC and Mac.
To set up remote connec
tivity wi
th your DVR, you must:
1 Port forward the HTTP and Client ports (def
ault: 80 and 9000) on your router to your DVR’s IP
address.
2 Create a DDNS account.
3 Enable DDNS on the DVR.
4 Test the remote connection by entering your DDNS address in a web browser.