Instruction manual

106
Appendix C: Recording Audio
Appendix C: Recording Audio
The system can also record audio for up to 4 channels (4-channel models) or 8 channels
(8-channel models). You must have audio-capable cameras (not included) or self-powered
microphones (not included) in order to record audio on the system.
Connect an RCA audio cable from the camera
into the corresponding Audio INPUT port
8-channel model shown
To enable audio recording:
1 Connect the BNC video cable from the camera to one of the BNC Video INPUT ports
on the
rear panel of the DVR. For example, connect the camera to Video INPUT port 1.
2 Connect the RCA audio cable from the camera to the corresponding Aud
io INPUT. Following
the example in step 1, you would connect the cable to Audio INPUT port 1.
3 Right-click to
open the Menu Bar and click the Main Menu button ( ).
4 Click Re
cord and select the MainStream tab.
Check Audio to enable audio
recording on each channel
5 Ensure the Audio checkbox is checked next to the channel the audio-enabled camera is
connected to.
6 Click A
pply to save your changes.