Instruction manual

103
Appendix B: Connecting a PTZ Camera
To enter PTZ camera settings in the DVR:
1 Right-click to
open the Menu Bar and click the Main Menu button ( ). Enter the system
password.
2 Click Devic
e and select the PTZ tab.
3 Configure the following according to your PTZ
c
amera’s specifications:
• Channel: Select the channel the PTZ camera
is connected to.
• Protocol: Sel
ect from Pelco-D or Pelco-P.
• Baud rate: Select the PTZ camera’s baud rate.
• Data Bit: Sel
ect from 5~8 data bits.
• Stop Bit: Select
from 1 or 2 stop bits.
• Parity: Sel
ect from None, Odd, Even, Mark
or Space.
• Cruise: Sel
ect Enable to enable PTZ cruise.
• Address: Enter the PTZ camera’s address
Use
the Copy To drop-down menu to copy the
PTZ sett
ings to multiple channels.
4 Cl
ick A
pply to save your settings.
Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1 Select the channel that the PTZ camera is connected to.
2 Press and hold the PTZ butt
on on the front panel of the system for 6 seconds. Enter the
system password. The PTZ menu opens.
PTZ button
Press and hold for 6 seconds