User guide
Table Of Contents
- Changes to This Guide
- Contents
- Getting Started with Your SoundPoint® IP 650 Desktop Phone
- Customizing Your SoundPoint® IP 650 Desktop Phone
- Configuring Basic Settings
- Changing the Appearance of Time and Date
- Changing the Display Contrast
- Changing the Backlight Intensity
- Enabling the Headset Memory Mode
- Selecting the Correct Headset for Electronic Hookswitch
- Selecting the Ring Type
- Changing the Language
- Changing the Graphic Display Background
- Muting the Microphone
- Adjusting the Volume
- Managing Call Lists
- Managing Contacts
- Managing Incoming Calls
- System Customizations
- Configuring Basic Settings
- Using the Basic Features of Your SoundPoint® IP 650 Desktop Phone
- Using the Advanced Features of Your SoundPoint® IP 650 Desktop Phone
- Using the SoundPoint® IP Backlit Expansion Module
- Troubleshooting Your SoundPoint® IP 650 Desktop Phone
- Regulatory Notices
- Index
User Guide SoundPoint IP 650 Desktop Phone
2 - 8
Selecting the Ring Type
You can select different ring types to distinguish lines or to distinguish your
phone from your neighbor’s phone.
To change the incoming ring type:
1. Press .
2. Select Settings > Basic > Ring Type.
3. (Optional.) If multiple lines are configured on your phone, first select the
line to change from the list using the and .
4. Use and to select the desired ring type.
To hear the selected ring type, press the Play soft key.
5. Press the Select soft key to change to the selected ring type.
6. Press to return to the idle display.
Changing the Language
Many languages are supported by the SoundPoint IP 650 phone.
To change the language:
1. Press .
2. Select Settings > Basic > Preferences > Language.
Note
If you configure your SoundPoint IP 650 phone with a silent ring, press the flashing
Line key or the Answer soft key to answer the call. If your handset is off hook, the
call is routed to the handset. If your handset is on hook, the call is routed to the
speaker.