User guide

SoundPoint
®
IP 650 Quick Start Guide
Fasten the wallmount unit to wall
using wall anchors (not included).
When wallmount is secured and
all cables are connected, snap the
SoundPoint® IP 650 into place.
SoundPoint
®
IP 650 Startup
As soon as power is supplied, the
SoundPoint
®
IP 650 starts an automated
process of establishing itself on the
network and downloading software and
applications.
Check with your system administrator
if specific configuration is required for
your application software or if any errors
appear during the download process.
For further instructions on how to use your
new SoundPoint
®
IP 650, consult
the User Guide available from www.
polycom.com.
Deskmount Method:
1
Attaching the Base Stand
The base stand can be attached to the SoundPoint
®
IP 650 in one of two ways:
2
Wallmount Method:
On the back of the phone, remove
the wallmount tab located behind
the hookswitch. Reposition it
so that the end tab is facing up.
This will ensure that the handset
remains in place within the cradle
in a wallmount position.
Connect all cables. Align tabs of base
stand as shown.
Snap firmly
into place.
1 2
3