System information

Integrating Polycom DMA Systems with Siemens OpenScape

6 Configure the following settings on the DMA Signaling Configuration screen:

○ SIP Settings

» SIP Signaling Check to enable.

» Unencrypted SIP port Choose TCP, 5060.

» TLS port 5061

Next, add an external SIP peer.

To external SIP peer the DMA system:

1 Launch your web browser and enter the IP Address of your DMA System, for example,

http://10.1.1.24 .

2 Click on Continue to this website (not recommended).

3 Type in the User ID (default is admin) and type in the Password (default is admin).

4 Select your Domain (default is LOCAL).

5 Go to Log in > Network > External SIP Peer, as shown next.