System information

83
Chapter 9: Integrating Polycom DMA
Systems with Siemens OpenScape
This chapter provides an overview of how to set up and configure Polycom® Distributed Media
Application™ (DMA™) Systems to interoperate with Siemens OpenScape® products. For more detailed
information about configuring DMA systems, refer to the documentation on the Polycom Support site.
Polycom DMA systems running software version 5.0 and later can place and receive calls with Siemens
OpenScape Desktop Client PE version 6 and OpenScape Desktop Client WE version 6 with Siemens
OpenScape Voice version 6.
Configuring the Polycom DMA System SIP Settings
This section shows you how to configure the DMA SIP system properties when setting them up to
interoperate in a Siemens OpenScape environment.
To configure Polycom DMA Signaling Configuration properties:
1 Launch your web browser and enter the IP Address of your DMA System, for example,
http://10.1.1.24 .
2 If your PC’s firewall settings cause a security dialog to display, click on Continue to this website
(not recommended).
3 Type in the User ID (default is admin) and type in the Password (default is admin).
4 Select your Domain (default is LOCAL).