System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
78
○ Telepresence Mode The field value indicates whether the system is licensed to work with
RPX and TPX Telepresence room systems. You can choose True or False.
○ Serial Number This field displays the serial number of the RMX system.
○ Multiple Services A Multiple Services license is installed.
○ HD If you are using the RMX 1500 with a MPMx-Q media card, you will need an additional
license if you want to use HD with Continuous Presence.
○ Polycom Partners The field value indicates that the system software contains features for the
support of specific Polycom Partner environments.
○ Memory Size (MB) This field indicates the RMX system memory size in MBytes. Specify one
of the following values:
» 1024 MB Version 7.1 requires 1024 Mbytes of memory.
» 500 MB If memory size is 512MB, Version 7.1 is not supported.
» 2048 MB Specify this memory size when using the RMX 4000.
○ Card Configuration Mode Indicates the MCU configuration as derived from the installed
media cards:
» MPM+ Only MPM+ cards are supported. MPMx cards in the system are disabled.
» MPMx Only MPMx cards are supported. MPM+ cards in the system are disabled.
Notes on Card Configuration Mode:
○ When you start with Version 7.7 installed, the RMX system enters MPMx mode by default,
even if no media cards are installed.
○ The RMX system switches between MPM+ and MPMx Card Configuration Modes only if MPM+
or MPMx cards are removed or swapped while the RMX is powered on.
○ The Card Configuration Mode switch occurs during the next restart.
○ Installing or swapping MPM+ or MPMx cards while the RMX system is off will not cause a mode
switch when the system is restarted. The RMX starts in the Card Configuration Mode that was
active previous to powering down.