System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
72
The RMX CS IP screen displays the following settings:
○ Service Name The name assigned to the IP Network Service by the Fast Configuration Wizard.
○ IPv4
» IP Address the IP address of the RMX.
» Default Router IP Address The IP address of the default router. The default router is used
whenever the defined static routers are unable to route packets to their destination. The
default router is also used when host access is restricted to one default router.
» Subnet Mask The subnet mask of the MCU. The default value is 255.255.255.0.
If you have configured IPv6 in network Services, the following IPv6 display:
○ IPv6
» Scope IP Address
» Global The Global Unicast IP address of the RMX.
» Site-Local The IP address of the RMX system within the local site or organization.
» Default Router IP Address The IP address of the default router. The default router is used
whenever the defined static routers are unable to route packets to their destination. The
default router is also used when host access is restricted to one default router.