System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments

Modifying Ethernet Settings

When using the RMX 1500/4000 platforms, you can manually modify the automatically identified speed

and transmit/receive mode of each LAN port that the system uses if the specific switch requires it in the

Ethernet Settings dialog.

Admin Tip: RMX 1500 Dialog Port Numbers and RMX 1500 MCU Port Numbers are Different

The port numbers displayed on the RMX 1500 dialog do not reflect the physical port numbers that

labeled on the RMX 1500 MCU.

You will need to match the port type to the label on the back panel of the RMX 1500 MCU. Use the

following table to match the port type to the back panel label.

Table 7-1: Matching Port Type to Label on the RMX 1500

Port Type Label on MCU

1500 4000

Media LAN 2 LAN 2

RTM LAN Card

Modem Modem LAN 1

RTM-IP 4000 Card

Management 1 MNG B LAN 2

Signaling 1 MNG LAN 3

ShM Shelf LAN 6