System information

Integrating Polycom RMX Systems with Siemens OpenScape
65
○ SIP Servers You can use one or more primary or alternate servers.
» Server IP Address or Name SIP IP address or FQDN of the OpenScape Voice. Enter the IP
address of the preferred SIP server.
Admin Tip: Use a Hostname in IPv4 & IPv6 or IPv6 Mode
When in IPv4 & IPv6 or in IPv6 mode, it is easier to use Names instead of IP addresses.
» Server Domain Name SIP IP address or FQDN of the OpenScape Voice
Enter the name of the domain that you are using for conferences, for example:
user_name@domain name .
The domain name is used for identifying the SIP server in the appropriate domain according to
the host part in the dialed string.
For example, when a call to
[e-mail] reaches its outbound proxy, this proxy looks
for the SIP server in the
polycom.com domain, to which it will forward the call.
When this call arrives at the SIP server in
polycom.com, the server looks for the registered
user (EQ1) and forwards the call to this Entry Queue or conference.
» Port: 5060 Enter the number of the TCP or TLS port used for listening. The port number
must match the port number configured in the SIP server.
The default TCP port is 5060. The default TLS port is 5061.