System information

Integrating Polycom RMX Systems with Siemens OpenScape
61
• Transmission error rate
The RMX system supports two QoS methods: DiffServ and IP Precedence. Each method uses a different
way to encode packet priority in the packet header. The RMX system implements QoS per Network
Service, not per endpoint.
Note: The Routers Must Support QoS
Note that the routers must support QoS to allow IP packets to get higher priority.
To configure QoS settings:
1 In the RMX Management pane, click QoS.
The QoS settings display, as shown next.
Admin Tip: Routers Must Support QoS
The routers must support QoS in order for IP packets to get higher priority.